This is plug type accessories,also named Separable Connectors. It includes separable Elbow,straight and Tee connector kits. Our separable connectors are widely used in switchgears,transformers,cabinets and other electrical equipments.It is made of EPDM or silicone rubber with integrated field control.And adopts advanced triple-layer( a conductive inner layer,an insulation layer and a conductive outer layer) injection technique to guarantee the interface property to avoid gaps between layers and decrease partial discharge maximally.Our separable connectors are mainly includes IEC type & IEEE type.
- EN 50181 Plug-in type bushings above 1kV up to 52kV and from 250A to 2.5kA for liquid filled transformers.
- EN 50180 Bushings above 1kV up to 36kV and from 250A to 3.15kA for liquid filled transformers.
- HD629.1 Test requirements on accessories for used on power cables of rated voltage from 3.6/6(7.2)kV up to 20.8/36(42)kV-Part 1:cables with extruded insulation.
- IEC 60502.4 Power cable with extruded insulation and their accessories for rated voltages from 1kV(U=1.2kV)up to 30kV(U=36kV)-part 4:test requirements on accessories for cable with rated voltages from 6kV up to 30kV(U=36kV.
- lEc60099 Metal oxide surge arresters without gaps for A.C.systems.
- JB/T 8952 Polymer-housed metal oxide surge arresters without gaps for A.C.systems.
- IEEE 386 Separable insulated connector system for power distribution system above 600V.
- GB11032 Metal oxide surge arresters without gaps for A.C.system.
- JB/T 8952 Polymer-housed metal oxide surge arresters without gaps for A.C.systems
15kv 600A/20kv 600A IEEE Type Rear Connector Cable Accessories
- 630A IEEE type Rear connector connects with IEEE type tee connector or other model Rear connector which extended cable connection circuit (branch). It can not be directly connected with the sleeve socket, wall bushing and so on. The tail can be plugged directly with insulating plug, but also can be extended to connect with the rear connector of another line or Rear connector with surge arrester.
- It is suitable for XLPE cable with 25mm²~400mm² cross-section of cable.