35kV Rear connector with surge arrester

OEM and ODM are accepted

Summary
35kV Rear connector with surge arrester Suitable for 35kV electrical systems, extend to instal in the front connector or behind the connector for the electrical equipment.And provide over voltage protection.

  • Executive standard
    EN 50181 Plug-in type bushings above 1kV up to 52kV and from 250A to 2.5kA for equipment other than liquid filled transformers
    EN 50180 Bushings above 1kV up to 36kV and from 250A to 3.15kA for liquid filled transformers
    HD629.1 Test requirements on accessories for used on power cables of rated voltage from 3.6/6(7.2)kV up to 20.8/36(42)kV-Part 1:cables with extruded insulation
    IEC 60502.4 Power cable with extruded insulation and their accessories for rated voltages from 1kV(U=1.2kV)up to 30kV(U=36kV)-part 4:test requirements on accessories for cable with rated voltages from 6kV up to 30kV(U=36kV)
    lEc60099 Metal oxide surge arresters without gaps for a.c.systems
    JB/T 8952 Polymer-housed metal oxide surge arresters without gaps for a.c.systems
    IEEE 386 Separable insulated connector system for power distribution system above 600V
    GB11032 Metal oxide surge arresters without gaps for a.c.system
    JB/T 8952 Polymer-housed metal oxide surge arresters without gaps for a.c.systems

Voltage characteristics

Current characteristics

Type description

Product structure
35kV Rear connector with surge arrester adopt the flood proofing design, is fully insulated, fully shielded and all sealed products. The resistors inside of surge arrester has good nonlinearity.so the arrester with low residual voltage, large capacity, fast response time, steep wave flat, effectively prevent the lightning strikes and switching impulse and has good over-voltage protection, to ensure transmission operation.

Parameter list