35kV 630A IEC type Rear connector

OEM and ODM are accepted

630A IEC type Rear connector connect with IEC type tee connector,extended cable connection circuit (branch). The tail can be plugged directly with insulating plug, but also can be extended to connect with the rear connector of another line or Rear connector with surge arrester.

  • Executive standard
    EN 50181 Plug-in type bushings above 1kV up to 52kV and from 250A to 2.5kA for equipment other than liquid filled transformers
    EN 50180 Bushings above 1kV up to 36kV and from 250A to 3.15kA for liquid filled transformers
    HD629.1 Test requirements on accessories for used on power cables of rated voltage from 3.6/6(7.2)kV up to 20.8/36(42)kV-Part 1:cables with extruded insulation
    IEC 60502.4 Power cable with extruded insulation and their accessories for rated voltages from 1kV(U=1.2kV)up to 30kV(U=36kV)-part 4:test requirements on accessories for cable with rated voltages from 6kV up to 30kV(U=36kV)
    lEc60099 Metal oxide surge arresters without gaps for a.c.systems
    JB/T 8952 Polymer-housed metal oxide surge arresters without gaps for a.c.systems
    IEEE 386 Separable insulated connector system for power distribution system above 600V
    GB11032 Metal oxide surge arresters without gaps for a.c.system
    JB/T 8952 Polymer-housed metal oxide surge arresters without gaps for a.c.systems

Voltage characteristics

Current characteristics

Type description


Product structure
1.Using of high quality EPDM rubber, which not only has excellent electrical performance, while tear, ozone resistance, oxidation resistance, corrosion resistance,High mechanical strength.
2.Adopt the international advanced technology of three-layer injection molding,It effectively guarantee the good performance of the interface, to avoid the gap between the layers,and Reduce partial discharge.
3.The good design of Inside and outside the screen makes Electric field structure more optimized; uniform external shielding, grounding resistance of less than 5000 Omega, the use of cable head outer surface effectively maintain zero potential, ensure the operation safety.
4.The stress body with non-slip design, can effectively prevent the installation of stress body misplaced accidents.
5.Has good thermal stability and thermodynamic properties, good sealing performance can be run underwater.

Parameter list