Strain insulator (tension insulator) is an important component in the process of transmission line erection, which mainly includes porcelain strain insulator, glass strain insulator and composite strain insulator .Suspension insulator is widely used in the insulation and mechanical fixation of high voltage overhead transmission lines. And suspension insulator can be divided into disc suspension insulator and rod suspension insulator. Disc suspension insulator is the most widely used insulator in transmission line. Rod suspension insulator has been widely used in Germany and other countries.
Strain insulator (tension insulator) is an important component in the process of transmission line erection, which mainly includes porcelain strain insulator, glass strain insulator and composite strain insulator . It can effectively isolate the live wire from the ground and keep the position of each wire unchanged.Due to the influence of environmental factors, insulator will inevitably be damaged when the transmission line is operating.Strain insulator (tension insulator) is the most common product in transmission line. It is always used together with supporting power fittings. According to the construction needs, several strain insulators can put together to meet the tension requirements.
Suspension insulator is widely used in the insulation and mechanical fixation of high voltage overhead transmission lines. And suspension insulator can be divided into disc suspension insulator and rod suspension insulator. Disc suspension insulator is the most widely used insulator in transmission line. Rod suspension insulator has been widely used in Germany and other countries. If you are interested in porcelain insulator,suspension insulator,disc insulator,strain insulator,contact changsha rich company for more information, www.hncmec.com, export@hncmec.com
Compared with suspension insulator, strain insulator needs to bear the tension of overhead line, which is mostly used at the end of line and the electric tower where the line needs to change direction. Suspension insulator does not need to bear the tension of the line, but only the gravity of the line itself. So suspension insulator is mostly used on the electric tower where the wire is straight.When the voltage is higher than 33kV, the performance of pin insulator will decrease due to the increasing size and weight. At the same time, the handling and replacement of single insulator with larger size also bring great challenges to the actual operation. In order to solve these problems, suspension insulator came into being.
Skype: richtang731
Phone: 18900751339
Tel: 0731-85499326
Email: richpower2020@outlook.com
Add: Rich BLDG Shaoshan Nan Ave Changsha city Hunan province China